RhinoSwitch® RSM-3200 Managed Switches

The RhinoSwitch® RSM-3200 Modular Managed Switches are industrially hardened and offer up to Thirty two Fast Ethernet RJ45 ports. Based on the power supply selected, these ports can be either PoE or PoE+. They can alternately be configured with 32 Fast Ethernet and 6 Gigabit fiber or copper ports. The RhinoSwitch® RSM- 3200 Managed Switches are highly suitable for harsh or extreme environments.

Datasheet (PDF) Contact now
  • Up to 32 100Mb copper or fiber ports (with up to 8 PoE+ ports) OR up to 4 Gigabit ports and 24 100Mb copper or fiber ports (with up to 8 PoE+ ports)
  • Robust, user-friendly Management Software
  • Extended operating temperatures ranging from -40°C to +85° C
  • Multi-level passwords, SNMPv3, IEEE 802.1X, RADIUS, TACACS+, HTTPS, and SSL/SSH for network security
  • High and low AC/DC power options

The features of the Management Software in RhinoSwitch® RSM-3200 Managed Switches are:

  • Robust GUI and CLI-based Management Software
  • RSTP, RSTP-2004 & MSTP for rapid recovery
  • VLAN (802.1q) with Double Tagging and GVRP
  • IGMP Snooping and GMRP multicast filtering
  • Quality of Service (802.1p) and TOS/DiffServ
  • LLDP for automated topology discovery
  • LACP 802.3ad
  • Port Rate Limiting and Broadcast Storm Limiting
  • Port Mirroring for Troubleshooting
  • Simple Network Management Protocol (SNMP)
  • Simple Network Time Protocol (SNTP)
  • Remote Monitoring (RMON)
  • DHCP Client, Server, and Relay
  • Port Trunking for optimal bandwidth utilization
  • Port Manager for Speed/Duplex/auto negotiation
  • Event Monitoring with automatic email warnings

The features of Cyber Security in RhinoSwitch® RSM-3200 Managed Switches are:

  • SSH/SSL Encryption
  • Radius-based Access Management and Authentication
  • TACACS+ based User Management
  • Multiple levels of Passwords/User Access
  • Port Security with MAC based Access Control
  • 802.1X Port Based Network Access Control
  • SNMPv3 Encrypted Authentication and Access Security
  • VLAN (802.1Q) for Security and Traffic Segregation

Product Specifications

RSM-3200
  • Operation: Store and forward wire speed switching, non-blocking
  • Modes: Full or half duplex operation with flow control supported on all ports
  • Switching bandwidth: 12.8 Gbps
  • Latency (100M typical): 7 µs plus frame time
  • Packet Buffer: 4 Mb
  • Ethernet isolation: 1500 Vrms 1 minute
  • Console port: RJ45
  • 8K MAC addresses
  • RJ45 ports: Up to 32 ports fully IEEE 802.3 compliant (Optional: up to 8 PoE ports (802.3af) or PoE+ ports (802.3at)
  • RJ45 speed and duplex: Configurable or 10/100/1000 auto-detecting for speed & duplex (full or half)
  • RJ45 MDI/MDIX: Auto-MDI/MDIX-Crossover automatically supports either straight or crossed cables
  • RJ45 polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs
  • Multi-mode and Single-mode. Up to 32 fiber LC-type ports, each FDX or HDX. FDX mode is default.
  • Optional: SFP Slots for 2 Gigabit fiber optic transceivers or 1000Mb copper transceivers for distances up to 40km
  • Optional: 4 Gigabit fixed fiber ports may be selected rather than Gigabit SFP slots
  • AC: Input: 100-125VAC at 60 Hz, 215-240VAC at 50 Hz
  • DC Power input: Dual redundant power inputs for single power supplies
  • DC: Low Input voltage range (24/28V,48/55V) DC: 18-75VDC
  • DC: High Input voltage range (110, 125, 150, 250VDC): 90-300VDC
  • Power consumption: 60 watts max
  • Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 µs)
  • Alarm Output (RJ45): 2 alarms; form C contact relay and normally closed
  • Operating temperature for all models: -40°C to +85°C
  • Storage temperature for all models: -45°C to +90°C
  • Humidity: 5 to 95% RH (non-condensing)
  • Altitude: 19,000 ft. (6,000m)
  • MTBF: > 219,000 hours
  • Optional Conformal Coating available on request
  • Safety: UL/CSA/EN/IEC 60950-1, 2nd Edition CB report
  • Emissions: EN/ETSI 300-386; FCC Part 15
  • EN55032,24; AN/NZ CISPR22, VCCI, EN61000-6-4 Class A
  • CFR 47-FCC part 15, ICES 003, Class A
  • Hazardous Locations: UL/cUL Class 1 Div 2; ATEX Zone 2
  • IEC 61850 EMC & Environmental Operating Conditions Class C for Power Utility substations (KEMA)
  • IEEE 1613 Class 2 Environmental Standard for Power Utility Substations
  • NEMA TS-2 & TEES for DC- and PoE-powered traffic control equipment
  • Military: MIL-STD-461G
  • Military: MIL-STD-810G
  • Marine: DNV
  • Mining: Directive 2006/21/EC
  • Telecom: NEBS, GR63 & GR1089, L3; ETSI 300 386, EN 301 489
  • Railways: EN50155 and EN50121-4 Compliant
  • Vibration: IEC 60068-2-6
  • Shock: IEC 60068-2-27
  • Freefall: IEC 60068-2-32
  • RoHS (Pb free) and WEEE compliant
  • Immunity:
    • EN61000-4-2 (ESD) Level4; EN61000-4-3 (RFI) Level 4 EN61000-4-4 (EFT) Level 4;
    • EN61000-4-5 (Surge) Level 4
    • EN61000-4-6 (C. Susceptibility) Level 3
    • EN61000-4-8 (PF Magnetic Field) Level 4
    • EN61000-4-10 (Damp Osc.) Level 4
    • EN61000-4-11 (VDI) Class 3
    • EN61000-4-12 (Osc. Wave Im.) Level 3
    • EN61000-4-16 (I.C. CMD) Level 3
    • EN61000-4-29 VDSI on DC Input
    • EN61000-6-2; EN61000-6-5 DT&T-NL, Immunity PS&SS
  • Chassis: 1RU; may be rack-mounted
  • Material: Metal with powder coating
  • Dimensions:
    • Width: 17 in (43.2 cm)
    • Depth: 8 in (20.3 cm)
    • Height: 1.73 in (4.4 cm)
    • Weight: 5 lb. (2.3 kg)

IP32

5 years

USA

TOP